MAGStar™ Jetting Tool

The MAGStar™ Jetting Tool is a BOP jetting tool with the combined functionality of a downhole magnet. The MAGStar™ Jetting Tool is designed to jet the BOP cavities to dislodge and capture ferrous metal debris during wellbore clean-up operations of the BOP.

Features

  • Available in multiple sizes to suit onshore, platform or sub-sea BOP stacks
  • Multiple angled jets for penetration into internal BOP profiles
  • Jets can be configured to select direction and total flow areas

Benefits

Cost savings

  • Combines magnets and jetting tools into one tool, reducing operating costs

Integrity

  • Available with high torque connections reducing the need for reduced strength crossovers
  • Single piece mandrel with no internal connections for increased strength

Reducing Non-Productive Time

  • BOP cavities are known to collect debris and junk, and jetting before installing the completion can prevent premature failures
  • Capturing debris in the Riser and BOP Stack prevents it from falling down hole and the potential damage to completions

Applications

  • Deep Subsea wellbore clean-up operations to collect debris in the riser and BOP
  • During or after milling operations to remove swarf which can damage the BOP rams and annular preventor
  • Pre-completion wellbore clean-ups for enhanced BOP jetting

Operational

  • The MAGStar™ Jetting Tool is typically deployed immediately above the XTractR™ BOP Junk Catcher during BOP jetting to capture dislodged debris
  • Best practice recommends to function the rams and annular to help dislodge debris before jetting the BOP stack at 10 BPM while rotating slowly, making 3 passes
  • It is also recommended to reduce jetting to 5 BPM while passing the annular
  • The MAGStar™ Jetting Tool can also be used to jet behind the wear bushing after it has been removed

Download product fact sheet

Please enter your email address to download this file. Note: You will only be prompted for this on your first download. Thank you! 

By ticking this box, you are agreeing to our Legal Notice and Cookie Policy