XTractR™ BOP Junk Catcher

The XTractR™ BOP Junk Catcher is a robust, wellbore clean-up tool and can be run individually or modularly as part of the ArmRdillo™ Wellbore Clean-Up System. The XTractR™ BOP Junk Catcher can be adapted to most common casing sizes and any drill pipe combination.

Features

  • Robust Mandrel with optional Integral Pup Join
  • Quick Drain Ports allow fast emptying on the rig floor to inspect contents
  • Robust, free-rotating Wiper Cup catches debris which has been jetted from the BOP and Wellhead
  • Shrouded Filter Screen can be customized with various mesh sizes to suit varying applications
  • Can be quickly assembled redressed on location with simple hand tools 
  • No external bolts, clamps or fasteners that can come loose down hole

Benefits

Cost savings

  • The OWS ArmRdillo™ Wellbore Clean-Up System integral pup joint reduces rig handling time
  • Field serviceable at the rig-site with basic hand tools

Increases Well Productivity

  • A properly executed wellbore clean-up reduces fine debris which can block screens and pore throats reducing well productivity
  • The filter screen captures sands, junk and debris which can block pore throats

Integrity

  • Available with high torque connections reducing the need for reduced strength crossovers

Reducing Non-Productive Time

  • A robust wellbore clean-up is proven to reduce nonproductive time during the completion of the well
  • Reduces premature failure of completion equipment by debris which can interfere with valves, electronics and other hardware

Applications

  • BOP Jetting Operations, during pre-completion wellbore clean-up operations where it is run in tandem with a OWS Short Time Jetting Tool or other similar tool to capture any dislodged debris which can otherwise fall downhole
  • Can be run below a wear brushing retrieval tool or during wellhead cleaning operations
  • Can be run during riser clean-up and displacement operations to prevent debris from falling downhole

Operational

  • The BOP Junk Catcher is typically placed at the end of the BOP Jetting string
  • Optional, a Short Time Jetting Tool or MAGStar Jetting Tool may be spaced around 1 stand above the XTRactR™ BOP Junk Catcher
  • With the XTractR™ BOP Junk Catcher below the wellhead, the BOP can be jetted and any debris which is dislodged will be trapped inside the tool and can be retrieved at surface
  • The XTractR™ BOP Junk Catcher can be quickly emptied at surface to inspect contents and can be redeployed quickly if necessary

Download product fact sheet

Please enter your email address to download this file. Note: You will only be prompted for this on your first download. Thank you! 

By ticking this box, you are agreeing to our Legal Notice and Cookie Policy